Interesting

[moparstuart]

http://lasvegas.craigslist.org/cto/5342167587.html

[moparstuart]

 

[Dave Kanofsky]

overwhelming pics and description...

[Aero426]

overwhelming pics and description...

They went all out.

[Montreal Wing Car]

Quick! Before Kounts Kustoms grabs it!

Ben

[djcarguy]

 Has anyone checked it out an got more info??

  Before cbrestoration finds it an buys it,haha.  see adds 7 days old? 

  wonder if long race history or just a home hack,local?    DJ  900 miles from it!

[thehemikid]

When I enlarge the pic it appears to be a photo shop.

[skip68]

It looks real to me.      
Looks like you can see through the drivers side hole a little. 

[thehemikid]

Could be,...just aint convinced yet. And sump'n going on with the right head light opening.

[tan top]

 

[wingcar builder]

I talked to the guy it's homemade. got a few pics from him. kinda rough....well, ....a lot rough.

[6bblgt]

I've looked at it - pass,  Chris has looked at it - pass
was a red '68 Charger, never "was" a racecar - IS a wannabe!

any good pieces in here?  

[thehemikid]

  Convinced,....................and would've passed too.

I see he has another project on a trailer behind the dually,  but can't determine what make that C-pillar is though.

For whatever the reason, not everyone can hang in there to complete a long project,... some times we can have too many projects, ...and sometimes life has a way of throwing sticks in your spokes too.

[odcics2]

I spy a real Nichels Engineering cross member.    $2,500 - 3K right there...   

[Mike DC]

Yeah, that caught my eye too.   

[odcics2]

This is what happens when you try to build a "stock  car" from looking on line at pics of real cars.
There is a lot of things not plainly visible to the untrained eye.  Look at the stance.  Even with a Nichels front crossmember it sits high. 

[wingcar builder]

it must be blocked up there isn't even any torsion bars in it.

[wingcar builder]

Does have float hubs tho.

[6bblgt]

Chevy friend (Camaro "stock" car on trailer in background, legend car in garage) of a friend owns it & got it in a trade.  Knows nothing Mopar, I said I'd look at it & help to figure what he has but he listed it while I was on my way to look at it.    Had it listed as "real Charger Daytona" originally.  At that point I didn't want to invest too much time because he didn't care or want to know the truth & it could've been gone before a real "value" could be determined.  There was a rusted 8-3/4 center section with a newer looking locker in it laying inside the car.  Wood blocks between control arms & frame rails, torsion bars inside the car.

He also would never give me a price, I saw the  $5K on-line just like everyone else. 

[Stevearino]

70 hood, 70 fenders.Decent quarters. Steel nose cone. Looks like a window plug in it from the inside shot.Decent doors. Looks like a shortened deck lid. If it has a 69/70 tail panel that is a plus. For $5000.00 you would be hard pressed to put all those parts together. It might not be a bad start for a resto mod or a drag car.

[wingcar builder]

[chargerman69]

Maybe has a wing for it
Can tell that was one on it before

[djcarguy]

  ANY pic of whole left side an rear??


  Does cage an what looks like a roof skin by nose go too this project??

   is there a wing??  looks like was 2 wings drilled an fitted at one time?


    wood a set of  front coil over shocks instead of t-bars work on this if it was light weight stripped down street  an drag toy??


  ANY info on BILL of sale or poss of title for strreeeet legal use?/?    Thanks DJ ,have a 68 440 an wing what else does a guy need!!

[Lennard]

Front fender wheel arches are cut.

[Stevearino]

Looks like the plug was made with the idea that a piece of lexan would be cut to fit in the hole. No tail light panel either which would make sense if you were building a race car as this would be covered with a sheet metal blank anyway. From the rust pattern on the quarter around the wing holes it appears that at some point there was a wing protecting that area.