News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

OIL PRESSURE GAUGE JUMPING

Started by 01CHARGER, April 06, 2006, 02:30:04 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

01CHARGER

April 06, 2006, 02:30:04 PM
I HAVE INSTALLED A NEW AFTERMARKET OIL PRESSURE GAUGE AND A WATER TEMP GAUGE, I HAD A PROBLEM WITH THEM BOTH JUMPING AROUND SO I FOUND OUT FROM A FRIEND TO GROUNG THE ENGINE (WHICH WAS NOT) TO THE FIREWALL, WICHED WORKED FOR THE WATER GAUGE, BUT THE OIL GAUGE IS STILL JUMPING, DO I HAVE TO GROUND THE TRANSMISSION THE SAME WAY?

Plumcrazy

#1
April 07, 2006, 11:09:11 AM
You don't have to ground the transmission.
How much is it jumping around?  The original gauges were thermal type gauges that responded very slowly to pressure changes.
A quality new gauge will respond much faster.

It's not a midlife crisis, it's my second adolescence.

01CHARGER

#2
April 07, 2006, 01:27:28 PM
ITS JUMPING AROUND PRETTY GOOD, WHEN YOU PUT A LOAD ON IT THE GAUGE GOES STEADY BUT AT A STOP OR IDLE IS WHEN IT JUMPS AROUND
Print
Go Up Pages1
User actions