Heater Resistor & Wiring Help

[holanae]

First, I think I missing a prong on my heater resistor that goes to my HVAC box, but I can't find a similar six prong heater resistor online so I'm not sure. Second, Does anybody have a wiring photo to the heater resistor. Trying to figure out the sequence of the four connectors. I know where the 3-prong connector goes but not the other three. This is for a 68 Charger. If in fact one prong is broke, I will need a new heater resistor.

[cdr]

that is correct the other 90deg  wires go to this, it is on the far right bottom of ac box

http://www.dodgecharger.com/forum/index.php/topic,87035.msg982010.html#msg982010

[cdr]

my 68 ac/heater resistor has 4 terminals . but that one may work this is correct

[holanae]

Your correct, I went back and was looking around and figured out where the two 90 degree wires go.  I'm guessing orientation doesn't matter being it is only a switch.  I'm now just trying to figure out which location the solo tan wire (C7) physically goes on my resistor in accordance with the schematic.

[A383Wing]

The wires are only supposed to go on one way on the resistor.....I have a resistor for you if needed, all spade terminals are there and not broken off.

I replied to your want ad a bit ago

Send me a PM if yer still looking for one.

[cdr]

1968 diagram


http://www.dodgecharger.com/forum/index.php/topic,78399.msg881590.html#msg881590

[A383Wing]

I'm now just trying to figure out which location the solo tan wire (C7) physically goes on my resistor in accordance with the schematic.

your C7 wire connects to the spade terminal that is broken off on your resistor

[cdr]

I'm now just trying to figure out which location the solo tan wire (C7) physically goes on my resistor in accordance with the schematic.

your C7 wire connects to the spade terminal that is broken off on your resistor

I disagree, i posted a picture of a 1968 resistor ,,, it is different than the one he has .

also look at the wiring dia, that i posted, it is for a 1968.

[A383Wing]

I'm going by the diagram he posted..I see no diagram that you posted...C7 goes to his broken off spade terminal according to his diagram

[holanae]

I saw a nose part with the bottom tab like mine. My Tan wire goes to the parallel tab above it.  They are the same contact points on the back side.

[cdr]

I'm going by the diagram he posted..I see no diagram that you posted...C7 goes to his broken off spade terminal according to his diagram

   
Re: Heater Resistor & Wiring Help
« Reply #5 on: Today at 06:46:06 PM »
   Reply with quoteQuote Modify messageModify
1968 diagram

http://www.dodgecharger.com/forum/index.php/topic,78399.msg881590.html#msg881590

http://www.dodgecharger.com/forum/index.php/topic,78399.msg881590.html#msg881590

[holanae]

NOS part

[holanae]

Links you sent are color coated and everything.   Nice. Thank you.

I'm going by the diagram he posted..I see no diagram that you posted...C7 goes to his broken off spade terminal according to his diagram

   
Re: Heater Resistor & Wiring Help
« Reply #5 on: Today at 06:46:06 PM »
   Reply with quoteQuote Modify messageModify
1968 diagram

http://www.dodgecharger.com/forum/index.php/topic,78399.msg881590.html#msg881590

http://www.dodgecharger.com/forum/index.php/topic,78399.msg881590.html#msg881590

[holanae]

Since this was original to the car. I imagine than ran out and used another resistor board from another model.

[cdr]

very possible, I hope you have it figured out.

charlie