1968 emissions decal placement

[Mytur Binsdirti]

On a '68, does it go next to the fender tag or next to the washer bottle?   

[VegasCharger]

On a '68, does it go next to the fender tag or next to the washer bottle?   

Mine is on the grille support bracket top surface pass. side. I believe it's the original sticker in the original place.

[Ghoste]

Wow, never saw one there before. 

[moparchris]

Typically speaking, next to the washer bottle.  However there needs to be allowances for cars built after extended alcoholic induced lunches etc...

[VegasCharger]

Typically speaking, next to the washer bottle.  However there needs to be allowances for cars built after extended alcoholic induced lunches etc...

Are you saying that I have a "one of one"

[triple_green]

mine-original is on the pass fender next to the washer bottle. May 68 build.

[tan top]

  im far from a expert  , but all  the  untouched / unrestored  68 chargers ive seen  , have always been on the passenger side inner fender in front  of the washer bottle ,  like the other guys say  

be interesting to see if  they varied  location , between  St Louis & Hamtramck assembly plants    , like the jack instructions decal location does ( well , all the ones ive seen   ) Hamtramck  top  left ,  St Louis  right  

[Hard Charger]

I put mine next to the washer res. I saw it there in some reference photos. Performance graphics showed it here also.

I go to shows and they are always next to the fender tag.

was thinking of moving mine.

[tan top]

I put mine next to the washer res. I saw it there in some reference photos. Performance graphics showed it here also.

I go to shows and they are always next to the fender tag.

was thinking of moving mine.

  the  E series  1969 model  ,   are next to the fender tag  , on all the original  unrestored cars I've seen  ,    pretty sure for 1970  too

[Mytur Binsdirti]

  im far from a expert  , but all  the  untouched / unrestored  68 chargers ive seen  , have always been on the passenger side inner fender in front  of the washer bottle ,  like the other guys say  

be interesting to see if  they varied  location , between  St Louis & Hamtramck assembly plants    , like the jack instructions decal location does ( well , all the ones ive seen   ) Hamtramck  top  left ,  St Louis  right  

I knew hemi cars had it placed there, but I wanted to find out if all were placed there & that's where I just ended up placing mine tonight.