News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Reuse these torsion bars or not?

Started by fatboy, August 21, 2015, 07:21:58 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

fatboy

August 21, 2015, 07:21:58 PM
Hey guys, I need advice again....
I cleaned the original bars up but as you can see in the pic, there are some rust bubbles in the steel. Should I reuse these or do I need to replace them.
Thanks

cdr

#1
August 21, 2015, 08:26:15 PM
that is from the way the factory painted them,, they dipped them & set them flat to dry.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

fatboy

#2
August 22, 2015, 06:41:30 AM
No kidding?
I would never have guessed that.
Thanks for the info. You saved me a lot of money.
Print
Go Up Pages1
User actions