News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

are stock rockers egg shaped?

Started by troy.70R/T, August 20, 2015, 07:45:34 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

troy.70R/T

August 20, 2015, 07:45:34 PM
I just noticed that all the stamped steel rockers are egg shaped and have lots of slop. Is this normal? these are the rockers off my 65 383.

A383Wing

#1
August 20, 2015, 07:46:43 PM
yup, normal...all of mine are like that also

troy.70R/T

#2
August 20, 2015, 07:48:38 PM
Thanks A383WING I thought I had more problems.  :2thumbs:

BSB67

#3
August 20, 2015, 07:58:18 PM
Quote from: troy.70R/T on August 20, 2015, 07:48:38 PM
Thanks A383WING I thought I had more problems.  :2thumbs:

Normal.  Wish I had a dollar every time someone replaced the rockers because they were loose on the shaft.

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

troy.70R/T

#4
August 20, 2015, 08:08:02 PM
Well let me just say all the good people on here have saved me so much money over the years.  :2thumbs: I wish the internet had been around in the late 80's. I wouldn't have gotten screwed they few times I did a swap meets.  :'(. All though I must say most swapers were honest and educated me.

A383Wing

#5
August 20, 2015, 08:40:00 PM
make sure you put the shafts in correctly or you will end up with oiling problems

troy.70R/T

#6
August 20, 2015, 10:11:45 PM
yes thanks. totally on top of that part. :2thumbs:
Print
Go Up Pages1
User actions