Borgeson Power Steering Chuck

[gcdsn76]

Has anyone had experience with the Borgeson power steering chuck as a replacement?

[Mike DC]

   
I've heard a couple people say that it's good, but not dramatically better than a Firm-Feel-type overhaul on the stock Mopar box for half the cost. 

It does lose about 13 lbs of weight compared to a stocker.  There is a bit of header clearance gain too.   


The steering gear ratio of the Borgeson box is 14:1 compared to the stock 15.7:1.  A subtle change.  I assume the fact that it's a Saginaw conversion also opens up the possibility of getting their 12.7 or 16:1 ratios installed into it as well. 

The stock Mopar steering arms can be swapped out to result in 12:1 ratio (with the stock Mopar PS box) but that does cost several hundred dollars for new Pitman & Idler arms.