My 72 Rallye

[mopartybob]

Thanks Daytona  when I was rebuilding the car,the choice of rims was just as important to me as was the rest of the resto, and it was a toss-up between those and cragerSS's, I chose those due to the fact that I was moving to WA. state with the intent of switchin to the cragers, but the roads and weather were truly kaka... and I"da hated to see my nice,new,shiny cragers get hosed everytime I went check the mail....   

[AKcharger]

Hoorey for '72 Rallyes!

[mopartybob]

Hoorey for '72 Rallyes!

SSWWWwwEEEEeeeTTT, ,now THAT makes me SMILE...   

[AKcharger]

Thanks Sir!

yours is super nice as well!

[archie360]

That one's a beauty!  It's hard to go wrong with B5 Blue 

[mopartybob]

I've done some searching and couldn't find any links for the N96 fresh air assy. as a package, I did find that even with the power bulge hood, there were some differences in the framework that would/would not allow this to be installed w/o some major metal massaging, can someone please clarify, thanks... Robert

[AKcharger]

Hi Robert

I'll ad my two cents. With the fiberglass hood I'd call it a no-go, because of the lack of structure to hold the door actuator...I guess you could rig somthing up, but it would look cheesy. I originally thought the same for a standard bulge hood, but after I bought my N96 and then relooked at my bulge hood, their pretty much the same...might need to drill holes for the hoses.

The last problem for making an N96 out of a standard power bulge is the lip where the door sits when its closed, that would be a huge undertaking.  I'm sure there's a way to make it work, but again, there's the cheesy factor. It took me 5 years to find mine, but they are available from time to time. I do know where 2 are for $1800 each stripped

Here you can see that lip

[mopartybob]

Thanks AK, in this case i'll just stick with fender tag specific....lol.... I'd definitely have a burr under my saddle if my tags called for it,as for now, i'll keep it on my wish list,and thanks for the info. 5 yrs huh? dahmit... like trying to find an after dinner mint in Somalia.... 

[mopartybob]

WOW!!! after 13yrs in storage, I FINALLY have my Charger back. When I started this post a year ago It was to have been delivered the following week,but due to the vissisitudes of fortune,it just didn't pan out..... till now. Not too much for worse or wear,(body bubbles,moldy carpet, sticky locks and latches) this canyon carver will soon be back on the road again, will update soon....Robert

[polywideblock]

          

[AKcharger]

Standing by!

[mopartybob]

Hey AK, been awhile, but I know what you mean,... I can hardly contain myself, she's the first in line to roll into the shop tomorrow morning, turn the rotors,flush the tank,etc....and we'll take it from there, keeping my fingers crossed the trans  seals held up... , will update when I know more.. 

[Chargerguy74]

I'm excited.

[mopartybob]

  . howdy'all,been takin care of some health issues,but I'm still in the ballgame,will post up some new pics shortly, carry on Gentlemen 

[AKcharger]