News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

upper cowl support on a 69 front fender

Started by oldgold69, June 04, 2016, 04:55:37 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

oldgold69

June 04, 2016, 04:55:37 PM
on the inside of a 69 front fender there is a support that holds the antenna in place  mine is rusted along the inner fender side of the fender does anyone reproduce this or will I have to make from scratch what did you guys do on yours  thanks in advance

cdr

#1
June 04, 2016, 05:21:02 PM
will have to fabricate.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr
Print
Go Up Pages1
User actions