aftermarket sway bar kit.

[lexxman]

 Hi all. I'm restoring a 69 charger, I'm installing the front suspension. I got an aftermarket sway bar kit, because mine was mia when I got the car. It has different mounting brackets with it and it doesn't like right. I'm looking for people that have installed these before, I'm not sure if I got the correct one. Here's a shot of how it's fitting.

[Lennard]

You have to unbolt the the bracket from the K frame and slide it to the side and bolt it to the K frame again. Atleast, that's how mine is bolted to the K frame and it looks "normal".

[Rolling_Thunder]

that is how some aftermarket kits hang....    the original brackets moved the bar back and had the weird "A" shape that always got bashed to sh!t on parking stumps...     

[myk]

That's exactly how a fat Hotchkis bar mounts to the car.  This might be correct for your application...

[lexxman]

I will play with it some more, but I can't go back anymore. I don't really like how much that bracket sticks out. I don't know who made this kit. I will keep ya posted.

[myk]

Yeah I don't like it either.  I'm convinced that taking a hard turn one day will shear the brackets right off.  My welder says otherwise, but look at it...

[tan top]

mine is sort of like that , but with out looking , think its a little further back though ,  been so long since I done mine  ,  although  the brackets look reversible ,  think from memory ,  they fit slightly  better one way ,  well mine did I think , pretty sure   , had to drill an extra hole in the K frame  ,  so three bolts attached each bracket ,  
they are Addco brackets / aftermarket sway bar  , or a copy of theirs ,

 have addco bars front & rear on mine  ,  they were the only aftermarket Bars out there when I bought them for mine ( mid 90s )  , to ad one day after I done a resto     ( I started collecting parts couple of years / long  before starting my nut & bolt resto   )

thought about welding them on ,  too , but ! decided not to , incase I want to change stuff sometime ,

[lexxman]

Ya I think the brackets fit right or left and yes I still would have to drill a third hole in the k member. If this is how it should fit, I figure I will round off the corner of the mounting bracket. I tried looking on line for pictures or video but didn't see much,just one video. A before and after sway bar driving.