Billet Hood Marker Lights (With Pictures)

[hollywood1336]

Would any of the members be interested in something like this. My marker lights were unsalvageable, so a friend of mine and I machined a quick pair up, these are prototypes in the picture and do not show the screw/studs which would be included. My friend said he would consider making some more sets on a limited basis, $150 per set. They are direct fit, 6061-T6 billet aluminum, all you would need is your mounting bracket and light fixture, the stock light plugs straight in. The lens is press fit and sealed into the housing. They would come in a polished or brushed finish on top. They could be painted, powder coated or anodized to ones liking.

[Ghoste]

Neither here nor there to your question but it does look like a nicely machined little hunk o' metal there.   You guys did a nice job.

[WHITE AND RED 69]

Got any pictures of them installed?

I might be in for a set of the polished ones. 

[Daytona R/T SE]

 


http://www.chargerspecialties.com/signals.htm

[JB400]

I'd like to see them installed 

[MxRacer855]

Got any pictures of them installed?

I might be in for a set of the polished ones. 

I'll second this one White and Red! 

[hollywood1336]

Check out the photo above, a bit blurry but you get the idea. Mine are the brushed finish.

[WHITE AND RED 69]

Looks good. I'd take a set of the polished ones. 

[hollywood1336]

We should have three sets made up by the end of next week. I will post the pictures of the completed parts and provide Skips phone number for those interested in buying a set.