UCA/Frame Measurements

[Donks01]

Installing a new frame rail and UCA housing on passenger side of a 69 Cornet. This should be the same as a 68-70 b-body. Anyone have measurements from side to side? I want to make sure the UCA housing is where it should be before I weld in. The car had been in an accident and the passenger side frame rail was bent. Any under hood measurements out there? Thanks, Nate.

[Canadian1968]

you are talking about the entire shock tower / brace correct?  The UCA mounting points are part of this.

Just use the measurements from the opposite side if you had nothing to go from originally   

I do have some of what mine were, I am currently doing the exact same thing.

[Donks01]

Yes Canadian1968, I am talking about the shock tower to the frame rail. I did think about using the measurements from the other side, but I thought someone out there had a picture of some "under hood measurements." You know, just to be 100% safe before I weld.