400 with TKO600 and TTI Headers?

[1970Moparmann]

Can someone confirm if TTI 2" headers will work with a 383/400 with a TKO600?   

[DAY CLONA]

I've done a 440 (71 B body) with 2" TTI's and a TKO600, little tight on the passenger side by the bell housing,...I'd also recommend a mini starter, I generally use the "clockable" PowerMaster Mini
FYI...I generally use the hydraulic TOB set up, so I can't share any input on using the factory Z bar/linkage

What year B body are you installing the TKO?



Mike

[1970Moparmann]

It's for my 68 Charger.  I have Shumacher headers now, but the I couldn't fit (3) different mini high torque starters on it.  So, I put a stock starter on it, but I almost fried it already and thought it's a good time to get bigger headers on the engine and get the starter set up correct. 

I do have a hydraulic clutch and the Keisler bell housing.   With the 400 sitting a little lower than the 440, I'm curious if anyone has this setup.  I'll call TTI and Mancini on Monday to see if they have any history with this setup.

Since this car isn't stock, boy it's one freak'in thing after another....... 

[1970Moparmann]

Well, Mancini didn't know, so I called TTI.   In theory, this page shows a lot, but no one at TTI could confirm with my setup.   The other issue now is since my car is lowered a little, this could be a new issue.   I did find out though that TTI makes Schumaker headers - I didn't know this!  After I mentioned I had Schumakers, they said we make them, and pointed me to the TTI shorties, but are only 1 3/4".

http://www.ttiexhaust.com/Category-ClassicHeaders/400SR-218/TTi400SR-218.htm