News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

XV Enigineering seat belts

Started by comet_666, April 01, 2015, 09:52:43 PM

Previous topic - Next topic

oldcarnut

These are for bucket but has anyone tried them in bench.  I'm keeping my bench seat but want the belt setup

fy469rtse

they should offer them with an anchor point , to weld In your sill area ,
back behind door opening ,
I did it here with whats to our standards adr's to comply
its only a plate with captured nut , its behind carpet, so what would be the big deal in adding another location point for these ,
back seat passengers don't have to fight through belts to get in or out   

oldcarnut

I called them and no worky for the bench seat.  Guess I got searching to do and another post

Dino

Quote from: fy469rtse on April 01, 2015, 11:36:37 PM
they should offer them with an anchor point , to weld In your sill area ,
back behind door opening ,
I did it here with whats to our standards adr's to comply
its only a plate with captured nut , its behind carpet, so what would be the big deal in adding another location point for these ,
back seat passengers don't have to fight through belts to get in or out   

I'm doing something similar with 3 point belts designed for convertibles.  I'm attaching the top portion somewhere behind the rear upper pad.  I already bought some spare pads to customize.  I just can't stand the look of the belts hanging from the roof and they are not really comfortable either.
Extraordinary claims require extraordinary evidence.