News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

guys, help, 1972 dodge charger

Started by sawyer440rt, February 26, 2015, 11:53:59 AM

Previous topic - Next topic

EccentricMagpies

Quote from: sawyer440rt on February 27, 2015, 09:20:07 PM
Guys, update, I just got back from town with the new parts, for the tune up, got the belts to, they looked bad also, but while I was gone, my son was looking at the car and found a softball size hole in the floor on the drivers side toward the left side, is that bad?

Have you pulled the carpet back or was this hole through the carpet and floor?  Be good to pull out the front seats and the look at the whole floor and see what areas need attention
'74 Rallye 4spd (WH23L4) (1 of 94)
'74 Rallye Auto (WH23L4) (quad black)
'69 Swinger 340 - 4spd
'70 Duster 340 - 4spd

ACUDANUT

Quote from: EccentricMagpies on February 28, 2015, 09:28:09 AM
Quote from: sawyer440rt on February 27, 2015, 09:20:07 PM
Guys, update, I just got back from town with the new parts, for the tune up, got the belts to, they looked bad also, but while I was gone, my son was looking at the car and found a softball size hole in the floor on the drivers side toward the left side, is that bad?

Have you pulled the carpet back or was this hole through the carpet and floor?  Be good to pull out the front seats and the look at the whole floor and see what areas need attention


Yes, pull the entire carpet out and what the floors look like...replacing floor sections is not hard. Neither is welding.

ACUDANUT

Quote:  "bring me 400 bucks and the rally is yours, when you get it done, give me a ride and the rt will be yours to, but not before the ride. I told him, not funny, he said he was serious and held his hand out to shake mine, he said he's been waiting half his life for someone to really want to know about them, not just get them and make a profit on them."

Best deal I ever heard of.

ACUDANUT

Quote from: sawyer440rt on February 27, 2015, 03:37:26 PM
Thx for the advice jb, will do, heading to town now, I live in the country, 30 min to get there, do I need the title to get special parts for it??

Are you serious.  :smilielol:

ACUDANUT

Quote from: 6spd68 on February 27, 2015, 04:13:44 PM
Not sure why no one else has said this yet...  But if you're going to get a free R/T outta the deal; stop fretting, and restore the darn thing!

Even if you spend over on this project, YOU'LL HAVE A #'S MATCHING R/T CAR! Still can't see how you'd possibly go wrong there.  You even said the boss likes the car, so fix it up for whatever it costs, and keep it as a nice mild 318 your wife can drive.  :2thumbs:

You'll basically be doing exactly what he did...  Base Charger for the wife, 2nd Gen for you.

Based on what I've read thus far, you're already deep enough in.  Stop second guessing yourself, and F***ing do it Marine!

I highly doubt he was a Marine.


ACUDANUT

Pray all you want. I did 28 Years in the USMC.  You don't strike me as a devil dog.  :Twocents:

maybe admin ?

Pete in NH

I  bet everyone would love to see a bunch of pictures of the 72. They would also help everyone in answering questions about how to proceed on the car as things come up.



JB400

You should probably just ignore Acudanut.  As you can tell, he gets a long with everyone. ;)

sawyer440rt

Yeah jb400, I just think it's funny how ppl get all up in someone's kool-aid, don't even know the flavor, Lolol. kind of sick today so im staying in, but will get more pictures when feeling better and ATTACK the charger again, but I did notice kind of a bad or soft spot on a few fenders while unloading it, not sure how bad it is, gonna buy some sanding tools, a metal cutter and dewalt grinder and im gonna get me a welder as soon as I feel a little better form harbor freight, my buddy likes his. I got the parts for the tune up, and new belts. but was looking it over real good last night, in 30 weather woke up with a head cold, oh well that's what I get for wearing a t-shirt the whole time. OORAH!!!

Daytona R/T SE

Tune it up.

Change the fluids, belts, hoses, etc.

Go through the brakes.

Make sure none of the tie rods or anything else on the suspension is about to snap.

Patch the hole in the floor with a piece of tin, pop rivets and some roofing tar.

Give it a good scrubbin' inside and out.

All of this shouldn't take more than one l-o-n-g weekend.

Drive it around the neighborhood a few times.

Cruise it on over to the old guys place and make him happy.

Get the R/T.


Where are you ?

You might even find a volunteer or two to help you from this site.  :Twocents:

We've been working on these cars for decades. :2thumbs:

Some of us since they were just new cars. :coolgleamA:

Pete in NH

On the welder, be careful on those low cost Harbor Freight jobs, many of them are flux core only welders. You really want one that is set up to use the shielding gas. There is a night and day difference between the weld quality when using a shielding gas welder over a flux core type. Do some reading up on MIG welding before you jump in on a welder. Just my  :Twocents:

Daytona R/T SE-  yes, they were new cars when I started out with mine, gee, if that doesn't make you feel old!

Daytona R/T SE

Quote from: Pete in NH on February 28, 2015, 01:12:56 PM


Daytona R/T SE-  yes, they were new cars when I started out with mine, gee, if that doesn't make you feel old!

For me, they were just 8-10 year old "gas hogs" that nobody wanted.

I can still remember the old man saying "You don't want that damned thing boy!"

"It's a gas hog !

Don't you know gas is going to be $1.00 a gallon pretty soon, and NOBODY is going to be able to afford to drive anywhere ?  :slap:

Wicked72

Amazing story cant wait to see them on the move!
M-Massively O-Over P-Powered A-And R-Respected

ACUDANUT

Quote from: JB400 on February 28, 2015, 11:37:24 AM
You should probably just ignore Acudanut.  As you can tell, he gets a long with everyone. ;)

JB400,  GFY

JB400

Quote from: ACUDANUT on March 01, 2015, 10:43:24 AM
Quote from: JB400 on February 28, 2015, 11:37:24 AM
You should probably just ignore Acudanut.  As you can tell, he gets a long with everyone. ;)

JB400,  GFY
Fact verified

TUFCAT

At least sawyer440rt posted a picture of his Charger for us.  :icon_smile_big:

ACUDANUT

Whatever makes you feel good.  The ones that points the fingers, is always the tyrant.
I have nothing to offer except peace.  Grow up, and become a man behind a keyboard.

ACUDANUT

Tuff Kitty, what do you want of me ?   As I have never attacked you. wtf

TUFCAT

:grouphug:

I think sawyer440rt is uneducated about his Mopars and even a bit naïve ....but he seems to be very genuine regarding his actions.  He even apologized and corrected the mistakes in his thread.  Its okay to make mistakes, as long as the Op isn't arrogant about it - which Sawyer certainly was not.

JB400

Quote from: ACUDANUT on March 01, 2015, 02:44:15 PM
Whatever makes you feel good.  The ones that points the fingers, is always the tyrant.
I have nothing to offer except peace.  Grow up, and become a man behind a keyboard.
You talk of peace, yet still want to fight behind a curtain.   :rotz:  Go watch the Atlanta race.

dyslexic teddybear

Quote from: TUFCAT on March 01, 2015, 02:49:37 PM
peace.  :grouphug:

I think sawyer440rt is uneducated about his Mopars and even a bit naïve ....but he seems to be very genuine regarding his actions.  He even apologized and corrected the mistakes in his thread.  Its okay to make mistakes, as long as the Op isn't arrogant about it - which Sawyer certainly was not.


Agree......

At first......well, it's the internet......wise people reserve judgement. As the story unfolded, and more details and pics are added, it becomes a compelling story. :yesnod:

I also think sawyer440 is a lot sharper then he may at first appear...... :scratchchin:

Chargerguy74

Quote from: sawyer440rt on February 28, 2015, 07:10:43 AM
Chargerguy74, I didn't say I don't want the 72, i do want the 72, and me and my wife can't wait to fix her up and go for a cruise in her.if he keeps his word, I will buy the rt off him and we will fix that one up to and when they are done, my wife and I will gladly take turns, but I don't know where you got the idea that I didn't want the 72, cause, we do!!!.

Just what I got out of reading the thread. Thanks for posting pictures. I'm sure some people here wish they actually had a 71-72 Charger so they could finally post pics of it  :poke:  Just kidding. I don't really care.
WANTED: NOS or excellent condition 72-74 4 speed shifter boot for bench or centre armrest car, part number 3467755. It's a rubber boot that looks like it's sewn up leather.

WANTED: My original 440 blocks. Serial # 2A188182 and 3A100002