New Dash Bezels!

[comet_666]

A few might have broken tabs on them, I contacted Classic Industries and they are looking into it.
Has my Dakota Digital cluster sitting in there...

[TexasStroker]

Looks right at home!  I'm sure Classic will get it taken care of for you!

[comet_666]

I must be dumb but how does the plastic bezel above the glove box door attach? Maybe I am not dumb and the very expensive bezels should have come with screws and stuff to attach them? That would have probably added another $30 shipping from CI though.

[Hard Charger]

I have recently installed CI bezels. they screw to the frame from/threw the face of the bezel. I believe I used the original screws.

there were no tabs to be concerned about. just a few tabs from the mold that need to be shaved, just like a model would have.

the only thing I did not like is black finish is easy to scrape off. I was adjusting the panels and my finger nail brushed the face and took some paint off the face.

[comet_666]

The other bezels have holes to screw them on but not the one above the glove box door..

[JB400]

It should screw on from the backside of the dash, probably with phillips head screws.

[tan top]

The other bezels have holes to screw them on but not the one above the glove box door..

you need to take the glove box liner out , she standard pebble grain  bezel above the glove box , is held on by speed nuts on the back , don't think I have a picture , dash stuff was among the picture information files  I lost a few years back 

[Hard Charger]

sorry, just looked at the old bezel.

4 screws from the back to mount the panel above the glove door. (68)

[tan top]

sorry, just looked at the old bezel.

4 screws from the back to mount the panel above the glove door. (68)

 
oh right  !! thought  sure 68s were the same    ........  , that's  interesting ....   

[comet_666]

Funny , Classic Industries just called me back and told me to use screws and washers on the bezel....

[VegasCharger]

Funny , Classic Industries just called me back and told me to use screws and washers on the bezel....

I just posted in your other thread:
http://www.dodgecharger.com/forum/index.php/topic,116664.0.html

CI said use screws and washers WTF!!!
Do you mean I know how to install their product but they don't

[JB400]

Not to knock CI down any further, but it's about the equivalent to the local auto parts store selling parts.  I only expect them to know the correct part that I want (and to have it), but not how to install it.

[comet_666]

They called me on Sat and told me they asked the manufacturer and they didn't know either and said use washers and a screw lol

[VegasCharger]

They called me on Sat and told me they asked the manufacturer and they didn't know either and said use washers and a screw lol

WTF!!! How ignorant is all this. Kinda makes me feel that I should be drawing a portion of their paycheck for me knowing how to install the bezel and them not having a freaking clue