News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Three point seatbelt question.

Started by eda4031, January 30, 2015, 01:19:34 PM

Previous topic - Next topic

eda4031

I want to install three point belts in my 70. I have found them at XV Racing Products. The pictures show them installed on a 70. Mine has two tabs above the driver/passenger door but I'm not sure if there is a mounting hole for attachment to the roof. Don't want to cut the headliner to explore. If it has the tabs, it should have an attachment hole up there as well, right?

Thanks for any help.

Mike DC

 
The shoulder belt holes should be standard on any roof.

 

GordonGriggs

 Can someone post a photo of where the shoulder belt harness bolts to the roof? The person that owned my 69 charger before me just put the lap belts in and did not put
in the shoulder belts. I have no idea where the bolt goes in the roof.

Thanks!

comet_666

I will post them tomorrow for you.
I'm going to be installing XV 3 point retractable front and the rear lap belts sometime this week.

comet_666


oldcarnut

From my 70 RR.  Screwdriver pointing to threaded hole

303 Mopar

1968 Charger - 1970 Cuda - 1969 Sport Satellite Convertible