News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

headlight switch to vacuum line connection

Started by FJ5WING, February 06, 2015, 12:51:07 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

FJ5WING

February 06, 2015, 12:51:07 PM
Im reconnecting my vacuum harness and was wondering if theres a trick for a leak free connection between the switch and the vacuum line manifold? I do have the clip to secure the molded block which I reffered to as a manifold to the switch but was wondering if I should dap some grease between the ports ?
wingless now, but still around.

70Sbird

#1
February 06, 2015, 01:24:28 PM
A light coating of Silicone grease is never a bad idea!
:Twocents:

Scott Faulkner

RealWing

#2
February 07, 2015, 09:21:47 AM
Quote from: 70Sbird on February 06, 2015, 01:24:28 PM
A light coating of Silicone grease is never a bad idea!
:Twocents:
I agree. That is what I did with mine
Jim
1970 Superbird 440-6bbl
1969 Barracuda 340 Formula S
1969 Barracuda convertible  6.1 L Hemi
2015 BMW K1600 GTL

Hard Charger

#3
February 07, 2015, 12:49:15 PM
Quote from: RealWing on February 07, 2015, 09:21:47 AM
Quote from: 70Sbird on February 06, 2015, 01:24:28 PM
A light coating of Silicone grease is never a bad idea!
:Twocents:
I agree. That is what I did with mine
Jim

not sure the grease would have any affect. it is not a tight fit to begin with.
Print
Go Up Pages1
User actions