4 speed trans crossmember same as auto?

[comet_666]

Same question for the drive shaft, I think the drive shafts are the same but just checking on the transmission cross member.
I have done a few searches but didn't see 833 to 727 swap info?

[ChargerST]

For 1970 it's the same as the auto cross member - just gets turned around. 69 and earlier is different but you can modify the auto cross member for using with a 4-speed.

[c00nhunterjoe]

For 1970 it's the same as the auto cross member - just gets turned around. 69 and earlier is different but you can modify the auto cross member for using with a 4-speed.

I modified my auto crossmember when i did the 4 speed swap. Took about 5 minutes.

[comet_666]

Cool, I'm going 4 speed to auto

[Charger-Bodie]

Cool, I'm going 4 speed to auto

For that you will need to get an auto crossmember . You can make an auto one a 4 speed one, but you would need to add parts to make an auto out of a 4 speed one.

[comet_666]

Dammit
always something...
thanks for the info, I would have been 

[six-tee-nine]

Anyone have more info or pictures about the auto to manual conversion.
Reason is, I need a 4 speed crossmember but have nothing at all. I already passed on a few auto crossmembers for sale since I thought they werent interchangeable.

correct 69 B body 4 speed crossmembers are a unicorn over here so it seems.

[comet_666]

http://www.dodgecharger.com/forum/index.php/topic,95764.0.html


Try this thread if you have not already.

[Moparparts]

70 crossmember is the same for automatic or 4-speed and has smaller bolt provisions then 69 & back. You mount the 70 crossmember the same way on either the auto or 4-speed because the correct original 70 4-speed trans will have a diffferent tail housing then a 69 and back, the mount provision is cast at a different location on that housing. I had the best of both worlds here a while ago it was cast with both mount provisions probably was a SOP