electric auto meter guages ???

[plasticman-32]

hello guys im putting after market guages in my 1968 dodge charger.. and i have all electric guages  how would the electirc speedo work with the 727 trans or what do i need to do?

thanks guys

[J-440]

 I think you need an aftermarket speedo cable/adapter.  Ask Auto Meter, they should know.  It substitutes your stock speedo cable and hooks up to the gauge and transmits a signal.  Don't forget to tell them what gear ratio and tire size your using.

[plasticman-32]

J-440 thanks so much man i looked it up and yes your right, thats it

[John_Kunkel]

You'll need a pulse generator that screws onto the transmission.

http://www.ebay.com/itm/Auto-Meter-GM-Electronic-Speedometer-Sending-Unit-Pulse-Generator-5291-Sender-/290900179467

No need to worry about which speedo pinion you have, the speedo has to be calibrated after installation.

[c00nhunterjoe]

Autometer sells the adapter. I am using the setup on my car. Simple 3 wire install. Ign hot, ground, signal to speedo. Boom, done. Calibration is also a breeze. Put it in cal mode, then drive a 2 mile trip, stop the trip, boom- done. Love mine.