1969 Rear Window Regulator Roller Replacement

[69rrgrabber]

Hi Guys,

Changing rollers on my 69 and thought I get some pointers before breaking the original rollers off.  So I have a roller kit, not sure which, and do have some rollers that have the same outer dimensions, but I just cant see how these are suppose to lock in place.  Hate to ruin the old if these wont snap on.  Any one done these>   Pic attached.

Thanks,
Carl

[b5blue]

I had to melt the old one off with my soldering iron.  Tough plastic! Carefully but with quite a bit of force I pounded the new one on.  The other one was in good shape so I opted to just clean and reuse it.

[69rrgrabber]

I guess it will be obvious once I have the old one off, how the new roller snaps on.

Thanks,
Carl

[b5blue]

Carl it was a beast......have you a bench vise? If you do it will most likely pop on better that way. 

[green69rt]

Look at this thread on page 4 about half way down.

http://www.dodgecharger.com/forum/index.php/topic,54582.75.html

[moparnation74]

Look at this thread on page 4 about half way down.

http://www.dodgecharger.com/forum/index.php/topic,54582.75.html

Great info!!