cruise control

[gtx6970]

the 68-69 style system has 2 vacuum ports on the servo , one taps into  the brake booster ck valve to supply engine vacuum. 2nd one goes to the brake swtich . As it's the servo vacuum release on the earlier systems. ( unique to 1969 and earlier systems ) If you look at the 68-69  servo it only has the 2 wire connections .
1970 and later have a 2 wire AND a single wire connection
1970 and later they all use an electrical dis-connect brake switch

The lever on the carb is called a lost motion link. I have some NOS ones around here ,,somewhere .



Mike if you cant find one I'll do some digging and see if I can find them for ya

[Nacho-RT74]

sorry I didn't understand the factory diagram!

got it now! Thanks... nice to learn something new

[Nacho-RT74]

I had the same T on my booster. 

Natcho, I'm missing the little "control link" that's used to attach to the carb.  Do you have any?

just the one I will use, but I think they began to be reproed couple of years ago! It's the same Odz posted

[71 SE3834V]

I have this unit I don't need and would like to get a few bucks for it to feed the Charger fund. Have more pics. No cables or bracket.
If somebody can tell me how to bench test it I will do so. I have a vac hand pump and voltage meter.

[ODZKing]

The one I pictures is 3769261, Lost motion link is what the book calls it.

[Nacho-RT74]

I have this unit I don't need and would like to get a few bucks for it to feed the Charger fund. Have more pics. No cables or bracket.
If somebody can tell me how to bench test it I will do so. I have a vac hand pump and voltage meter.

why you didn't appear 2 or 3 months ago? LOL

[71 SE3834V]

I have this unit I don't need and would like to get a few bucks for it to feed the Charger fund. Have more pics. No cables or bracket.
If somebody can tell me how to bench test it I will do so. I have a vac hand pump and voltage meter.

why you didn't appear 2 or 3 months ago? LOL

Too bad. I've had this and some other parts sitting here that I've been trying to get listed for over a year. Too busy breathing new life back into my car.
Need a new nox valve? 

[74charger07ram]

How much do you want for that servo?

[gtx6970]

The lost motion links

on the left is an original I think I got off of a 1970 Challenger I parted for it's options , the others are NOS  superseded version,, works the same just approx 1/4" shorter

[gtx6970]

You'll also need the clamp to hold the cable in place,,unique to cruise control applications.
And the brake light switch ( 1970 and later shown , on the left  )

[Nacho-RT74]

I have this unit I don't need and would like to get a few bucks for it to feed the Charger fund. Have more pics. No cables or bracket.
If somebody can tell me how to bench test it I will do so. I have a vac hand pump and voltage meter.

why you didn't appear 2 or 3 months ago? LOL

Too bad. I've had this and some other parts sitting here that I've been trying to get listed for over a year. Too busy breathing new life back into my car.
Need a new nox valve? 

LATE!!! I have got two used servos, but both got the diaphragm broken ( working on get replacement diaphragms )

I have everything of that ready ( including a NOS servo )

the brake light switch is diff too from the regular one, I think due the diameter hole for the switch. I didn't took care realy of that since I have an extra bracket to enlarge the hole.

I HAVE BEING COLLECTING THE RIGHT PARTS FOR YEARS, some have being NOS ( speedo and tranny wires, servo )... now I'm ready