how can i get a build/broadcast sheet

[texas charger 73]

I have my vin obviously and I also have my fender tag,but I don't have my build/broadcast sheet.  How can I go about getting or finding a copy.  Is it possible or am I just screwed?  I want it for knowing the rest of the options on car like wheels,tires, rear end,gear ratio. Stuff like that

[Ghoste]

Unfortunately, you could be screwed.  They were never meant to be kept in the first place so whenever they are there its due to fortune.  Where have you looked for it in the car?

[texas charger 73]

I lookednin glove box. That's about it. Rear end tag is missing sonim not sure size or ratio.

[Alaskan_TA]

Check the back side of the glove box then too.

And;

Under the front seat(s)

Under the rear seat bottom & in the rear seat back.

Under the carpet.

In the headliner (if it needs to be replaced anyway, search there as a last resort)

Some cars have none, some have as many as five. It is also possible to find one or two for other cars due to how the sub-assembly lines were run.

[texas charger 73]

Thanks I will look

[twodko]

Under the back seat cushion is where I'd look first.
That's where I found mine and it was in very good condition.

[Old Moparz]

I remember finding one inside the plastic cover on the front seat, back rest. (the upright part) Can't remember if it was a New Yorker or a 'Cuda seat, but don't the 3rd generation Chargers have removable panels on the front seats?  

[texas charger 73]

Mine has a split bench seat. Already pulled backseat and notta

[Alaskan_TA]

My 1973 split bench Charger had two under the front bench seat, in the springs. If there are any there you should be able to see it with a flashlight.

[bordin34]

I found mine last week under the passenger seat.