News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

US Car Tool Mopar K-Frame Stand

Started by kpkube, January 01, 2015, 12:32:23 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

kpkube

January 01, 2015, 12:32:23 PM
Hi,
Does anyone have this stand? How do you like it.  Is there any chance to get measurements? Looks like it would be easy to make.
Thanks

Troy

#1
January 28, 2015, 02:34:08 PM
I don't have one but it's probably the easiest "jig" of them all to make. There are holes in the bottom of the k-frame that the factory used on the assembly line so just make some "pins" to fit there and a spot at the back to hold up the transmission and you're good. When choosing materials and casters, realize that a fully loaded engine, transmission and front suspension/brakes is going to be 1,000 pounds or so.

Troy
Sarcasm detector, that's a real good invention.
Print
Go Up Pages1
User actions