Removing steering box

[frank1966]

any tips on removing the steering box? ive removed them before from chevys never dodge, pretty much the same, remove pitman, steering shaft, unbolt?

[twodko]

Frank,

I had a FirmFeel II box installed in 2009, they had to
lift the right side of the block a bit.

Tom

[frank1966]

I finally got everything detached from the gear box, it looks like it will slide down with a little turn from the back where the pitman arm is, I hope! I ran out of daylight in my garage, it looks heavy. Iam going to have firm feel rebuild mine to a stage 3.

[1974dodgecharger]

really?  I was looking at mine the other day it seems it would slide right out from bottom or top?  Unbolt the 3 bolts after pitman arm etc...right?

[MAC]

Took mine out from the bottom, once loosened it just fell out then sent it to Feel Firm to be rebuilt

[moparnation74]

I finally got everything detached from the gear box, it looks like it will slide down with a little turn from the back where the pitman arm is, I hope! I ran out of daylight in my garage, it looks heavy. Iam going to have firm feel rebuild mine to a stage 3.

Mine were done by firm feel as well.  Very pleased with quality, service, reliability, and performance.

When you get it back do not rotate the pitman arm or where the coupler attaches because it is dialed in for straight easy install.

[frank1966]

Thanks for the tip, i was planning not moving anything, wasn't sure if FF will send it back straight.