Another "Where do I find this??"

[A383Wing]

oil pressure sender terminal end that has opening slot in it for sender tip to slid into...the one below is clear, looking for a couple black ones if anyone knows where they are to be bought. I looked at numerous terminal houses, none have the slot in the plastic. I can use this one if I have to, just looking for the correct color

Bryan

[tan top]

there is a black plastic connector cover thingy with a slot in the side  ,that looks  very much like that  , its used in the  69 prolly 68 & 70 charger  ,  wiper switch  multi plug connector , there is a separate  brown wire , takes power from that switch , & goes  to the windshield washer pump switch ,   the one with the slot , is on the back of the wiper switch , if that makes sence  

*** edit found a picture I posted a while back ,  see  green circle )) ****

[A383Wing]

yea, I see it, but most of my spare harness's are 66 & 67 Charger...all of those had variable wipers on them..I did not find that special terminal end on any of my harness's

with companies reproducing the engine or dash harness, they have to be getting these from somewhere, just like the fuse box clips I was looking for separately in my other thread

[A383Wing]

nobody has any idea where to get above plastic wire end terminal new?

[squeakfinder]

nobody has any idea where to get above plastic wire end terminal new?

I don't even see it on Charger Specialties site, maybe call them. Might be a dumb question, but have you tried NAPA?

[charger Downunder]

White one maybe paint it black with plastic dye/paint.

http://www.repairconnector.com/products/GM-Single-Wire-Coolant-Temperature-Sender-Connector.html

[A383Wing]

I don't even see it on Charger Specialties site, maybe call them. Might be a dumb question, but have you tried NAPA?

yea, tried them, along with a lot of the major wire & terminal sites....nothing

White one maybe paint it black with plastic dye/paint.

http://www.repairconnector.com/products/GM-Single-Wire-Coolant-Temperature-Sender-Connector.html

interesting, didn't think of going to a GM site...might try and call them after the holidays and see if they have it in black, otherwise, the paint idea may work, thanks

[charger Downunder]

Here in Black.
http://www.ebay.com.au/itm/Oil-Temp-Sender-Sensor-Terminal-Connector-With-Cutout-GM-EH-HQ-WB-VN-Ford-/141516446426?pt=AU_Car_Parts_Accessories&hash=item20f3099ada

[A383Wing]

Interesting...wonder where he's getting them from...I doubt they are being manufactured in Australia...

thanks

Bryan

[ODZKing]

They are called Packard Terminals and Delphi makes them.  I just went through this.

http://terminalsupplyco.com/Store/Default.aspx?CAT=DEL010010&PCAT=53133#Categories
http://terminalsupplyco.com/Store/Default.aspx?CAT=DEL010030&PCAT=53133#Categories

http://www.mouser.com/Delphi-Connection-Systems/Connectors/Automotive-Connectors/56-Series/_/N-1ehb5?P=1z0zlezZ1z0x9zoZ1z0wv3l

http://www.texasindustrialelectric.com/_packard_terminals.asp

[charger Downunder]

They are called Packard Terminals and Delphi makes them.  I just went through this.

http://terminalsupplyco.com/Store/Default.aspx?CAT=DEL010010&PCAT=53133#Categories
http://terminalsupplyco.com/Store/Default.aspx?CAT=DEL010030&PCAT=53133#Categories

http://www.mouser.com/Delphi-Connection-Systems/Connectors/Automotive-Connectors/56-Series/_/N-1ehb5?P=1z0zlezZ1z0x9zoZ1z0wv3l

http://www.texasindustrialelectric.com/_packard_terminals.asp

The single wire one is easy to find A383 wing is after  the one with an opening slot in it at the side in black.

[A383Wing]

Bob, see first picture, that's what I'm after, the slot in a single terminal piece is hard to find...but looks like it's a GM part, so I think I can get one now