Vacuum hose size for headlights?

[Monziac]

Ok, this sounds stupid, but what is the size of vacuum hose you are using to run from the switch to the actuators?  Mine are so rotten I am having a hard time pulling the trigger on a spool.  The nipples of the actuators mic out to .20-.21 which equates to 7/32 hose.  Is this what you guys use?  I want to replace all of it since my dash is out and everything is easy to get to. 

Thanks,
Jon

[green69rt]

69bfan has reproduction hose kits (or has had in the past.)   Don't know the cost.  Last I heard they were about $180 for a complete set.

[Monziac]

I dont really need the kit, just want to replace the lines.  Those kits are like $180 - $225 and a spool of hose is $25.  Just confirming the size to order.  Thanks! 

[Monziac]

Gates 27042 5/32 hose was an exact fit. 50 ft spool was $20.

[fy469rtse]

I bought the kit , because it has the hoses bonded into a block on headlight switch , don't loose the clip that holds this on to switch ,
Just fitted this today , much better than generic hoses,

[Monziac]

Yes, I did the same. Removed my hoses from the block then pushed the new hose in with a dab of contact cement. Hoses had the exact OD so other than the yellow and green stripe it was perfect. Thanks, Jon