News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Fuel Tank J-bolt Bracket location

Started by tsmithae, November 04, 2014, 11:29:14 PM

Previous topic - Next topic

tsmithae

I have found pictures showing the placement of the fuel tank j-bolt brackets but I haven't been able to find any measurements.  Would anyone happen to have the measurements?

Thanks
Ted
Check out my full thread and progress here.

http://www.1970chargerregistry.com/mboard/index.php?topic=119.0

gtx6970

I can get measurements later today. It's still up on it's side


green69rt

Just take the measurement from the centerline of the holes in the rear cross member (behind the valance) and transfer them to the front of the trunk floor.  Mine is almost exactly 10" between the center of the holes..

tsmithae

Quote from: green69rt on November 06, 2014, 08:14:02 AM
Just take the measurement from the centerline of the holes in the rear cross member (behind the valance) and transfer them to the front of the trunk floor.  Mine is almost exactly 10" between the center of the holes..

That's a great idea, thanks!

Quote from: gtx6970 on November 06, 2014, 07:27:36 AM
I can get measurements later today. It's still up on it's side



I'd still appreciate measurements to verify if it isn't too much touble!
Check out my full thread and progress here.

http://www.1970chargerregistry.com/mboard/index.php?topic=119.0

green69rt

Got some pics.  a little shakey as I was holding the tape and the camera at the same time.   If you need more just holler.


fy469rtse

Holy cow Mitch   :o  you have paint
:2thumbs:looks good , have you updated your thread ?

green69rt

Quote from: fy469rtse on November 10, 2014, 06:26:20 AM
Holy cow Mitch   :o  you have paint
:2thumbs:looks good , have you updated your thread ?

Yeap.

gtx6970

Measured the ones on the car I am doing, and I am within a 1/4" of the measurements shown above