P-S-T K-frame bushings

[scott1973]

I have a set of P-S-T K-frame poly graphite bushings for my 73 Charger and cant seem to get the back ones to go in.  I have cleaned out the opening and using lots of grease.  Should I bring them some where to get them pressed in?  I've tried using a long bolt between the bushings with the metal disks on each side  and cranking it down to pull them together but no luck.  Any suggestions???

[Dino]

Throw them in the freezer for a few hours at least.  They will shrink hopefully enough to get them in.  If that fails I'd just take them to a shop to have them pressed in.

[scott1973]

Thanks Dino for the advise.  I got them in.