Ebay charger anyone from daytona beach area

[chargerman69]

Does anyone live in this area, looks pretty good but still want your input

http://www.ebay.com/itm/Dodge-Charger-SE-2-Door-Big-Block/181541581028?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20131017132637%26meid%3D02d37651dd5744308a4384a079fba455%26pid%3D100033%26prg%3D20131017132637%26rk%3D4%26rkt%3D4%26sd%3D161430947463

[73rallye440magnum]

That one has been relisted a few times. Probably because of the short description and absence of pictures. Looks like it has potential.

[chargerman69]

I wood drive it for a year or teo then restore it bsck to T7

[chargerman69]

.

[tan top]

I wood drive it for a year or teo then restore it bsck to T7

was it originally T7 ?    ,  looks like it might once of had a vinyl top ! unless i'm getting confused where i'm looking   ( see picture below .
its had a quicky paint job by the looks of it too    not really a biggie but if they have painted over the door lock/ latch / hardware  , plus a few other things I can see that is not right ,&   body / bondo shapes etc    ,   what else have they not done properly cut corners with ect , for the $$$ he is asking   ,  

having said all that , it was done some time ago &  if any rot was not done properly , would of thought it would of come through by now  

 all them things aside  , perhaps i'm being too critical    , it does  look good   , nice color  

[chargerman69]

This is not the charger that was T7, I put a new link to this yellow charger instead

[tan top]

This is not the charger that was T7, I put a new link to this yellow charger instead

oh right I see       ,   only was reading the ad  of the yellow one & it said original color combo  my mistake   

[tan top]

 

[tan top]

 

[tan top]

 

[tan top]

 

wants $32900 for it here

   http://www.autabuy.com/Vehicles/Details.cfm?VID=1739844&Year=1969&Make=Dodge&Model=Charger

[chargerman69]

thanks for posting the pictures tan top,
Am emailing the guy tonight and this the same color as your car

[tan top]

thanks for posting the pictures tan top,
Am emailing the guy tonight and this the same color as your car

yes same color !!

this charger looks good  , but imo needs some work ,  I don't like criticising / finding fault / picking holes in another guys car or even one for sale  ,  its got a few faults with the body that are apparent  just from the pictures   ,  PM  if you want  

[Homerr]

Looks like another case of the backward rear stripe.

[chargerman69]

Feel free to say whats wrong i want the input
I have not heard back from him yet not sure yet what were willing to pay yet

[tan top]

 before I start , I don't want to come across a A-hole  pulling a car apart  , ( but its for sale & asking good money imo ),  don't mean any offence to any one , just trying to help  , all what I have mentioned  , if I was after   that car , as a must have color options etc I wanted ,  would not put me off , if its only this stuff I have mentioned , when inspecting it in real life  , I  would  just factor in the time cost of materials  for a bare metal repaint   , if it can be bought for the right price ,  reason being  if these corners have been cut , what else has !! .
 think the seller is aware of the problems  , because of the pictures he has posted & sort of showing you , with out saying  

 not  including ( , evey panel is out of alignment (  mine was too & it had all original panels & never had a wreck ) think this is just Chrysler quality control , , but worth checking for accident damage all the same !
 body lines are a bit wiggly in places  , could just be incorrect blocking of high build primer , or a bondo bandit has been at work or both ,  also looks like  the primer was / may of been , incorrectaly ( car sales job) dry flatted from the passenger side shot  , looking down the side , soo could be something to do with it . trunk floor  how good has that been done , &  spare hold down bracket in wrong place ,   &  the trunk  lock painted ?  , all that points to how good the rest of the work is  
has various things missing &  incorrect stuff , most obvious is the seats . hoods off color too)
 
these are the main off putting things I see wrong below , from the pictures    , although the more you look the more you see ,

[tan top]

 shape / bad repair ,  bondo or bad blocking of high build primer  , or all  

1 , fender front edge
2,  fender front edge
3 & 4 , upper cowl join to Apost / pillar
 

[tan top]

 shape / bondo /  bad repair or ?

5 ,  roof  A post / wind shield  pillar  , seam cracked & pillar shape
6 & 7, missing weather strip ends  , plus painted  door hardware , no real biggie but what other corners have been cut !
8  , shape / bondo  =looks like rust coming through factory seam

[tan top]

 9 , looks like rust bubbling through  
10 ,  sealer / paint cracking
11 ,  no panel sealer , between frame & outer skin ,   hood skin will vibrate / resonate like the bottom of a snare drum going down the street
12  painted lock latch bolts , pin switch etc ,

[TUFCAT]

Trunk floor was replaced (no drain plug holes).
Front bumper chrome is very dull.
Poor quality quickie paint job all over - as pointed out and evidenced by the door jamb areas.
Undercoating covering up floor pan sections (probably replaced as well)
Front bumper is tweeked around corner (see tan top photo #4)
Has antenna hole in fender, with radio delete plate?

[tan top]

Trunk floor was replaced (no drain plug holes).
Front bumper chrome is very dull.
Poor quality quickie paint job all over - as pointed out and evidenced by the door jamb areas.
Undercoating covering up floor pan sections (probably replaced as well)

You got it  TC      

[tan top]

13 , same as 12    no biggie in its self  cutting corners  , what else has been cut !!
14 bondo or lead or both , lifting at factory joint
15 bondo shape , factory join
16 , bondo falling out , maybe  or bubbling because of rust  or  bad bondo or  , just could be my eyes seeing something that is not there ?  

[tan top]

  17 ,    either rust starting  or just dirt in end cap seams  
 18  , same as 5
 19 ,  rust or  may be dirt in  factory  joints / seams  

hard to say with out actually  looking at the car in person

[tan top]

 if you have decided on a y2 69  ,  this looks a much better car from the pictures  , says original motor too , although still has things wrong with it ,   but going by the pictures & not seeing it in real life  , your not ( famous last words   )  going to be into a bare metal repaint  to sort it out , but we all know what body & paint can be like ,    ,  

http://www.autabuy.com/Vehicles/Details.cfm?VID=1863749&Year=1969&Make=Dodge&Model=Charger%20SE

[Homerr]

if you have decided on a y2 69  ,  this looks a much better car from the pictures  , says original motor too , although still has things wrong with it ,   but going by the pictures & not seeing it in real life  , your not ( famous last words   )  going to be into a bare metal repaint  to sort it out , but we all know what body & paint can be like ,    ,  

http://www.autabuy.com/Vehicles/Details.cfm?VID=1863749&Year=1969&Make=Dodge&Model=Charger%20SE

1969 Dodge Charger SE R/T

This is a all matching # 1969 Charger SE with R/T upgrades,has original 383ci. V8

Just stop with false titling and the R/T Hemi Six-Pack keyword bs!   

[Homerr]

Back to the Florida car - for the right price it could be a nice driver with a proper resto down the road.

Drivers side shock tower looks to have peeling or bad mask job.
Oil cooler in front of radiator?
Seats look like an interesting and possibly more comfortable upgrade, wonder what they're from.

Good eye tan top and Tufcat.

[TUFCAT]

The passenger side SE emblem on the sail panel is crooked....and it appears to be positioned lower than normal and a little to the right....  

This makes me think the quarter panel was replaced, and the original post holes were covered by mud   There's not many other reasons why the emblem would be positioned wrong.  

[tan top]

The passenger side SE emblem on the sail panel is crooked....and it appears to be positioned lower than normal and a little to the right....  

This makes me think the quarter panel was replaced, and the original post holes were covered by mud   There's not many other reasons why the emblem would be positioned wrong.  

if deffo  has  had a  rear quarter  or just a skin  , on the driver side  ,  look how wide the  flanges of the  lower rear quarter &  wheel arch lip  , oem are thinner

[chargerman69]

Thanks for the help and for the info and pictures tan top,
The ad was pulled from ebay today
I found the ad for that one last night too. Its little bit closer to me to

[tan top]

  the other one looks a much much  better car from the pictures ,   has a few things wrong  , like painted  over  bolts  on the door  , deck lid spoiler  , no biggie  ,  look at the under side , that's what you want to see , original  undercoating , bit if surface rust   etc  ,   not something that has just been black spray bombed to sell    

[tan top]

 

[tan top]

 

[tan top]

 

[tan top]

 

[tan top]

 

[tan top]

 

[tan top]

 

can anyone make out the original color combo on the Broadcast sheet    , ......  ive not got the software on this new computer to , adjust pictures  etc

[Ghoste]

Does it come with the mini me's?

[TUFCAT]

OYE....that air cleaner.  

[bakerhillpins]

The passenger side SE emblem on the sail panel is crooked....and it appears to be positioned lower than normal and a little to the right....  

This makes me think the quarter panel was replaced, and the original post holes were covered by mud   There's not many other reasons why the emblem would be positioned wrong.  

Not so fast Tuffy... recall that the repro rear tail panel emblems we looked at for Dino at Carlisle are apparently not correct, or at least don't match his OEM with regard to offsets on the studs.   

OYE....that air cleaner. 

    sheesh 

[TUFCAT]

Yep that was certainly strange.

We both came to the same conclusion... why make the effort to reproduce an emblem and get something so important as the mounting post location wrong!  

[Homerr]

can anyone make out the original color combo on the Broadcast sheet    , ......  ive not got the software on this new computer to , adjust pictures  etc

I've got it right here:  https://www.youtube.com/watch?v=sp77AjBdlEc

[chargerman69]

Painted bolts is know no big deal to me and i wood hope it wood come with the mini me's

[tan top]

can anyone make out the original color combo on the Broadcast sheet    , ......  ive not got the software on this new computer to , adjust pictures  etc

I've got it right here:  https://www.youtube.com/watch?v=sp77AjBdlEc

  wow ! that's what I need     where do I find this software       

[Homerr]

But seriously....GIMP is free and does most of what Photoshop does.

http://www.gimp.org/downloads/

[marshallfry01]

I can't figure out why so many people use fram oil filters.  I don't trust them. I've heard of them collapsing and ruining an engine. 

[tan top]

But seriously....GIMP is free and does most of what Photoshop does.

http://www.gimp.org/downloads/

that's great  , thanks for the link ! will give it ago !! 

    much appreciated