72 - 727 Crossmember 'rubber bushing' replacement

[72Charger-SE]

Ok.  Another question...  can someone direct me to the proper location to replace this bushing?   Thanks & GOD Bless!

[hawkeye]

Not sure of your question.  You don't replace bushing, you replace entire mount.  http://www.summitracing.com/parts/ani-2512?seid=srese1&gclid=CIP89LbtlcECFQctaQod6yoAkg

[John_Kunkel]

Actually, the bushing itself can be replaced with stock rubber or aftermarket poly but, with the mount hole torn out like that, you need to replace the whole mount.

Satan rules.

[71 SE3834V]

For $5 replace the whole thing! 
Also available at Auto Zone, O'Reillys, etc. Part #2512. Just bought one for my project.

[72Charger-SE]

For $5 replace the whole thing! 
Also available at Auto Zone, O'Reillys, etc. Part #2512. Just bought one for my project.

Thanks for the advice...

I just ordered one from O'Reillys..  $9.95...  not $5 but not too bad for a price...   

[71 SE3834V]

For $5 replace the whole thing! 
Also available at Auto Zone, O'Reillys, etc. Part #2512. Just bought one for my project.

Thanks for the advice...

I just ordered one from O'Reillys..  $9.95...  not $5 but not too bad for a price...   

Yeah, O'Reillys price was higher.
I forgot to add that when I looked it up on Auto Zones website they showed a different one for my '71. I punched in '72, '73 & got to '74 before I got the correct picture & part #. Not listed right in their info.
Fortunately for me I have both stores within 3.5 miles.  I've seen the same part # out there selling for a lot more than $9.95!