News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

How to reattach taillight trim

Started by Bowers, September 25, 2014, 08:25:37 PM

Previous topic - Next topic

Bowers

How does someone go about reattaching the trim around the tail lights?

twodko

A lot of us use clear silicon adhesive.

Apply 8 or so small dabs of adhesive around the
trim. The number of glue points is more important
large drops of adhesive. Hold everything together
with blue painters tape and you're done.

Good luck and shoot a picture or two.  :yesnod:
FLY NAVY/Marine Corps or take the bus!

Patronus

Clear Poly-seamseal adhesive caulk from HDepot
'73 Cuda 340 5spd RMS
'69 Charger 383 "Luci"
'08 CRF 450r
'12.5 450SX FE

HeavyFuel

Must be '69 thing?       :scratchchin:    I don't remember using any adhesive to attach anything around the taillights.

twodko

FLY NAVY/Marine Corps or take the bus!

Bowers