Six-Pack Set Up With Holly Carbs

[Jvz]

I am currently assembling a 440 Six-Pack Motor for my 1972 Charger.

All parts were purchased new back in 2007 from PAW that is now out of business.

It is a newer Six Pack set-up with 3 Holly 2 Barrel carburetors on a Edelbrock Manifold.

I got the linkage kit that came from Mopar, but the pictures that show the linkage set up in the directions
are photo copies that you can't see anything (black smudges of copier toner).

Does any one have some pictures they can post that shows how all the pieces come together.

Or any advise on this set-up ie; trans kick down set up to a Torque Flight 727 Transmission.
Vacuum hose set ups, Linkage connections etc...

Any help will be greatly appreciated.

John

[Mopar Nut]

First off, Welcome aboard!

Here's mine.

[myk]

Nice...

[polywideblock]

 looks good ,are you going to run the idle solenoid

[Jvz]

Thank's Mopar Nut,

What Linkage Kit (brand name) is shown in the pics?

The one I have is from Mopar parts, not sure I have all these pieces.

I will check.  Any additional info would be great.

Jvz

[Mopar Nut]

looks good ,are you going to run the idle solenoid

I want to in the future.

Thank's Mopar Nut,

What Linkage Kit (brand name) is shown in the pics?
Jvz

Mopar Performance, the kit came mounted ready to go when I bought the set up.

Did you get a new throttle cable and kick down linkage with yours?

[Jvz]

Hi Mopar Nut

No, I did not get kick down linkage. Did the Mopar performance kit
come with yours? and where did you buy your kit or kits?

jvz

[Mopar Nut]

Yes, came with the six pack installation kit and kickdown linkage, I think it was through Six Pack Performance.
http://www.sixpackperformance.net/

[Jvz]

Thanks, I'll check it out
jvz