Does anyone know where to get the fasteners for the front grill chrome for a 68

[68charger440]

I have the chrome trim itself but I need the fasteners.

[Hard Charger]

they are available. these can be seen when installed in the car. they must be installed when the grille is out of the car.

mr.mopar should have them

[68charger440]

they are available. these can be seen when installed in the car. they must be installed when the grille is out of the car.

mr.mopar should have them

Thanks.  I looked on their site and couldn't find them, but I sent them an email.  Maybe I just missed them.

[sardillim]

try       http://mrgusa.com

[csx4590]

http://www.gunslingershifters.com/68chargergrilltrimoptions.htm

If you are talking about the hardware that holds the trim that surrounds the grill...

[68charger440]

http://www.gunslingershifters.com/68chargergrilltrimoptions.htm

If you are talking about the hardware that holds the trim that surrounds the grill...

That's the one.  Pricey for a few nuts and bolts, but it is what it is.
Thanks

[twodko]

Tom at R/T Specialties would have them too.

[68charger440]

Tom at R/T Specialties would have them too.

Thanks! I'll see who has the better price.

[six-tee-nine]

I saw Megaparts also has these, dunno about price or shipping...

[70-500-SE-EXPORT]

They are also available on ebay.

[Brock Lee]

If stock is not important, you can go with a small (like a #4) machine screw with a flat top and a washer. Slip the screw into the washer and slide the washer down inside the trim. Then use a nut and washer to mount to the plastic. It may not be correct, but it will do the job. I have done similar to the vinyl top trim on my car. Mainly because I wanted to add a rubber washer to seal out water leaks.