News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

casting numbers on caliper bracket to 11.75" rotor assembly

Started by Nacho-RT74, September 03, 2014, 01:09:44 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Nacho-RT74

September 03, 2014, 01:09:44 PM
A guy found me this setup, but since he is 500 miles from home and I don't trust ho he will take measure... do you know what casting numbers can be found there?

he found a KH number on them:

KH90425

is it posible this???
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

b5blue

#1
September 03, 2014, 04:15:37 PM
#'s should be in here for both slider and pin type: http://www.moparaction.com/Tech/archive/disc-main.html    :scratchchin:  I have a set of slider type I can check for you?

Nacho-RT74

#2
September 03, 2014, 11:33:29 PM
yes I have that website LOL... just that the PN doesn't appear to be the same on any size.

Did you get 11.75" assembly? if you can check would be nice
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Print
Go Up Pages1
User actions