News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1971 dodge charger superbee

Started by mybee, September 13, 2014, 10:49:10 AM

Previous topic - Next topic

mybee

Question: Is there a gasket / seal that goes under the insert on the bulge hood.  I don't know if one was ever produced.

ODZKing

I believe there was. I asked Jim from DMT at Carlisle and he wasn't sure.  So I made him a diagram the last time I had the insert off, but he has not gotten back to me.
If you look at the underside there is a ridge where it look as if there should be a gasket.  But even after I put a gasket like material in there, mine still leaks so I believe there should be something more like a thin gasket all the way around on the hood itself.

mybee

Thanks, I thought about doing the same.  You would think as popular these cars are that they're would be one.  I'll keep looking.

FJ6N96

mybee,

I recommend that you contact John Bober (aka: johnnybee)

He should have the info you're looking for.

FJ6N96
(Rick)