News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Part # for a 22" shroud for a 69 Charger 440

Started by Johnnys440Charger, March 17, 2006, 07:39:43 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Johnnys440Charger

March 17, 2006, 07:39:43 AM
Can anyone clarify what the part # would be a 22" shroud for a 69 Charger 440?

I keep seeing part # 2998328 being suggested but also have noticed that this is being correct for a E body 70-71.

My rad/engine bay setup looks similar to this one attached in the pic.

TNT

#1
March 17, 2006, 02:47:39 PM
What is the part number stamped on the top of the radiator?

Just 6T9 CHGR

#2
March 17, 2006, 04:50:46 PM
The correct part # is 2949130 for 69 440 without A/C 22" shroud.....

Pretty much made of unobtanium.........in other words very hard to get and very expensive...
Chris' '69 Charger R/T

Johnnys440Charger

#3
March 17, 2006, 04:58:34 PM
I can't make out the numbers.  I would have to sand it to find out.  Check the pics, can anyone make this out?

What would be the correct part # for the radiator?

Thanks all for your replies.

Just 6T9 CHGR

#4
March 17, 2006, 05:03:03 PM
2949053.....unobtanium as well :rotz:
Chris' '69 Charger R/T

resq302

#5
March 17, 2006, 08:57:08 PM
Chris,

Would that 053 be correct for a 383 HP 4 bbl car with out A/C and a manual trans?  IE- my car?
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto
Print
Go Up Pages1
User actions