News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Power steering gearbox -AN fitting???

Started by professor-patrick, July 31, 2014, 10:18:09 PM

Previous topic - Next topic

professor-patrick

Anyone know of an adapter to convert the standard high-pressure fitting on the gearbox of a 69 charger to an -6AN line?
Dr. Patrick Hagerman
Lead Designer - Scotlea Hot Rods
www.scotlea.com

John_Kunkel


The threads in the P/S control valve are 1/2"-20 which is equivalent to AN-5 so an AN-5 to AN-6 union should do the trick. Earls has what you need.

http://www.summitracing.com/parts/ear-985065erl
Pardon me but my karma just ran over your dogma.

professor-patrick

Dr. Patrick Hagerman
Lead Designer - Scotlea Hot Rods
www.scotlea.com

fy469rtse

I repeat , jeeze John where'd you pull that from , god you do know everything  :2thumbs:
I would never have guessed that they were anywhere near comparable