Roof emblem grommets. Pics/source?

[bull]

I never laid eyes on the grommets that hold the roof/sail panel emblems in place. A previous owner threw mine out and squished some bondo in the holes. Does anyone have pictures of them and a source for buying new ones? Or do you have to get them used?

[DFS68_Charger]

Year One cariies them. They are plastic push on type retainers. I bought mine from YO and took them to my body man so they could install my NOS emblems when the headliner was installed. They didn't use the retainers, so I have no idea how they installed my emblems.

DFS

[8WHEELER]

I have allways just used the self threading nuts that hold the Charger emblem on.

Dan

[bull]

I have allways just used the self threading nuts that hold the Charger emblem on.

Dan

Are those the speed nut or palnut things like they used on the dash pads?

[8WHEELER]

It is more of a speed nut, its more coarse than the ones on the back of the dash pads. Although
They could be used as well, I don't see why not, the threads would just be a bit closer together.
Just make sure the ID of the nut is not to small for the stud on the emblem, I have gone through
that before. If the nut ID is to small it can cut grooves to deep and possibly brake the stud. But if
you are carefull and notice its not to tight you will be fine 

Dan

[Just 6T9 CHGR]

Year One cariies them. They are plastic push on type retainers. I bought mine from YO and took them to my body man so they could install my NOS emblems when the headliner was installed. They didn't use the retainers, so I have no idea how they installed my emblems.

DFS

Funny thing....neither did I!!

The vinyl top holds mine in place.  Too much of a PITA to try and push those things on from the trunk

[4402tuff4u]

Year One cariies them. They are plastic push on type retainers. I bought mine from YO and took them to my body man so they could install my NOS emblems when the headliner was installed. They didn't use the retainers, so I have no idea how they installed my emblems.

DFS

Funny thing....neither did I!!

The vinyl top holds mine in place.  Too much of a PITA to try and push those things on from the trunk

Huh??

[Just 6T9 CHGR]

When you dont have the headliner out, thats how you have to gain access to the posts of the emblem to push the retainers on....

[JimShine]

I will post pics when I can. The nuts on my 1968 emblems are very similar to the nuts that hold the reflectors on a 1969. They are dome shaped and made of the same tyle of steel as the ones that hold the dahs pads, but are much taller.

[Dennis K]

Here's a pic of the ones that were on my roof emblems. They look identical in size to the ones that attach the grille emblem, but they are packed with black butyl-type stuff. They are self-threading, and all the 68s that I have owned had the same type nuts holding the roof emblems on. A 5/16" socket fits on them.

[8WHEELER]

Good picture, yep the grille Charger emblem on a 68, has the same diameter stud as the sail panel.
So the nut size will be the same, but the grille emblem does not need any type of seal.

Dan