News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Radiator is off center to the engine.

Started by Khyron, March 16, 2006, 09:35:11 PM

Previous topic - Next topic

Khyron

Is this normal. I was just out in the garage smoking a cig and noticed that my radiator is off center.

I replaced the original 19 inch with a aluminum 22 inch. This is a small block car. Is this going to be an issue when I go to get a shroud for it?


Before reading my posts please understand me by clicking
HERE, HERE, AND HERE.

Troy

Is it your radiator or the engine? I think both are off center... :D

Troy
Sarcasm detector, that's a real good invention.

Khyron

Quote from: Troy on March 16, 2006, 10:20:49 PM
Is it your radiator or the engine? I think both are off center... :D

Troy


smarty :nana:


we'll say the engine is fine, even though it is off center, the radiator just seems more so. i'll take some pics tonight.


Before reading my posts please understand me by clicking
HERE, HERE, AND HERE.

4402tuff4u

Quote from: Khyron on March 16, 2006, 09:35:11 PM
Is this normal. I was just out in the garage smoking a cig and noticed that my radiator is off center.

I replaced the original 19 inch with a aluminum 22 inch. This is a small block car. Is this going to be an issue when I go to get a shroud for it?


What were you smoking? (had to say it!) :D
"Mother should I trust the government?........... Pink Floyd "Mother"

andy74

may be your car is crooked?



j/k,, id check the mounting of the rad,see if its off somewhere

BrianShaughnessy

The whole drivetrain is offset about an inch towards the pass. side. by design.
Being as it's an aftermarket rad,  does it even have a flange or any other method to attach a shroud to?   
Black Betty:  1969 Charger R/T - X9 440 six pack, TKO600 5 speed, 3.73 Dana 60.
Sinnamon:  1969 Charger R/T - T5 440, 727, 3.23 8 3/4 high school sweetheart.

John_Kunkel

Take a look at any factory fan shroud and you'll see that the fan opening isn't centered in the shroud.
Pardon me but my karma just ran over your dogma.