Correct installation of front parking lenses (in the lower valence)

[Corellian Corvette]

I'm putting a set of charger specialties front parking lamps in my lower valence.

I notice there are three screws that hold the lamp in place - two small screws that go through the valence into the case, and one single screw that goes up through the center/front of the housing.

What is the correct method for installing that upper screw? There is a hole in a metal tab in the valence, but there is nothing to thread the screw into? Any pictures or help appreciated.

thanks!

[1969chargerrtse]

I'm putting a set of charger specialties front parking lamps in my lower valence.

I notice there are three screws that hold the lamp in place - two small screws that go through the valence into the case, and one single screw that goes up through the center/front of the housing.

What is the correct method for installing that upper screw? There is a hole in a metal tab in the valence, but there is nothing to thread the screw into? Any pictures or help appreciated.

thanks!

I just put one of those clip on/snap on sheet metal screw tabs in there.
Hope you appreciate the pictures as I ran out in snow storm to do that for you.   

[Corellian Corvette]

YES THANK YOU SO MUCH!

That's exactly what I needed to see. Thanks again!

[1969chargerrtse]

YES THANK YOU SO MUCH!

That's exactly what I needed to see. Thanks again!

Thrilled to be of help. 

[Voss]

The two small screws that go through the valence into the case, does anyone know what thread / size these are? My old lamps were totally butchered so I have no reference. Got a new set from Charger Specialties. Just got to find the correct screws now...