News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Torsion bar install tool...

Started by sanders7981, June 17, 2014, 07:52:18 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

sanders7981

June 17, 2014, 07:52:18 PM
I need to put these in my bare shell with no drive train.  Do I really need the tool to install the torsion bars?  Is there any reason they wouldn't just slide right in? 

lasvegas69charg

#1
June 17, 2014, 08:01:32 PM
I only used the tool for removal. They always slide in with ease.
69 dodge charger 383/727/3.55 (my dad is the original owner-matching number) stroked to a 496😉

green69rt

#2
June 17, 2014, 08:53:08 PM
Quote from: lasvegas69charg on June 17, 2014, 08:01:32 PM
I only used the tool for removal. They always slide in with ease.

Yeap.

Calif240

#3
June 17, 2014, 09:00:07 PM
No tool again... easy to get in. Just getting out is a B*tch.
Indianapolis '69 Charger. RestoMod.

Ghoste

#4
June 18, 2014, 06:43:40 AM
If it was sold as a torsion bar "install" tool they are just trying to increase sales.  They will slide in easily (at least they better) and just make sure not to nick them.

sanders7981

#5
June 18, 2014, 11:55:49 AM
 :cheers: thanks guys!  I should have put these in a while back, but I have been slacking.  Too much else going on with getting ready to move.
Print
Go Up Pages1
User actions