Is this bracket original?

[terrible one]

This is on my '68 where the left frame rail begins to bend upward to go over the axle housing, attached with two bolts. I recently put it to work holding up my muffler but it's been there since I got the car.

Does anyone know what purpose it originally served and/ or if it is OEM?

[tan top]

    that's not a factory bracket , that ive ever seen  .  your charger must of originally had a single exhaust  from the factory , because I can't see the OEM left side muffler hanger bracket , the left side was a bolt in deal at the factory .

have a read & look  here  
 
         
http://www.dodgecharger.com/forum/index.php?topic=91929.0  

[moparnation74]

I have never seen that bracket on a B body 68-70.

[Ghoste]

Me either, doesn't mean it isn't legit, just mean I haven't seen it before.

[Mytur Binsdirti]

Absolutely not.

[terrible one]

Thanks guys, I suspected that it wasn't OEM, but thought it looked a little too purposeful to be a generic exhaust hanger. 

@tan top, you're right it was a single exhaust/ 318 car originally.