500 Screws

[XS29LA47V21]

I know, that is a lot of screws in a given duration under certain conditions, but not those screws.

A-Pillar Screws - Could some please share with me what the Daytona/500 A-pillar screws are, I have forgotten.... length, details etc and where I can find some?  Do they match other exterior or interior 69 screws     Thanks ahead of time for the help.

[Wingnut426]

I use the same screws used to hold the exterior mirrors on.

[RallyeMike]

Mine were in the trunk. So I will be interested to know also. For now. I just used some from the parts stash that looked correct.

[hemi68charger]

Jason,
I can take one out of my a-pillar on the yellow car and take a picture for you. I do believe they are the original ones...

[CornDogsCharger]

I would be interested in knowing too because the car I am working on had three different screws that were probably dug out of a junk drawer. Thanks!

Justin
"CornDog"

[69_500]

I will sort through some pictures. I am pretty sure I have a picture of one up next to a tape measure.

[XS29LA47V21]

Any up date's.  The mirror screw would seem very close, maybe to long?

[hemi68charger]

Any up date's.  The mirror screw would seem very close, maybe to long?

Jason,
Call me today after 5pm. By the time I get home, I forget to take the pictures for you.............. You know my number... I need a friendly reminder every once and awhile........

[XS29LA47V21]

Any up date's.  The mirror screw would seem very close, maybe to long?

Jason,
Call me today after 5pm. By the time I get home, I forget to take the pictures for you.............. You know my number... I need a friendly reminder every once and awhile........

I will touch base.  A buddy pulled one out of an original Daytona somewhere south of the Mason Dixon line west of the Atlantic...lol.  Best I can tell from photo it is 1-3/16" long shoulder to tip, Philips obviously, chrome, full threaded, rounded top.  Feeling like the side mirror screw will be very close but have not looked at parts car yet..   

Advice or info still welcome from one of you guru's, does it match one of the factory screws?

[69_500]

Totally spaced looking for my pictures. I apologize. Pretty sure I have a picture of one next to a tape measure. There might be a picture of one buried in the thread on Geno's car too. But that might take a while to find.

[hemi68charger]

Totally spaced looking for my pictures. I apologize. Pretty sure I have a picture of one next to a tape measure. There might be a picture of one buried in the thread on Geno's car too. But that might take a while to find.

Jason,
Are you referring to the screws that hold the deflector along the windshield or the wing-window side of the A-pillar? Based on my experience with the two C500's and Daytona I've owned, they are different.....

[69_500]

Ok it has driven me crazy, but I can not find my pictures of the screws at all. I have went through about 20,000 photos so far to no avail.

[FJ5WING]

Thanks for the effort!

I will ask Tom @ R/T Specialties when I see him at Carlisle.