News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need a measurement

Started by 1charger69, April 22, 2014, 11:49:00 PM

Previous topic - Next topic

1charger69

Hi guys....I need the location of the screw holes for the vacuum cannister. ...my body guy made them go away..... :shruggy:.....thx much!

NHCharger

There is not much wiggle room for the canister since it's under the battery tray. Install the battery tray, then place your canister under it. Center the canister between the two battery tray supports. The measurement in from the inside edge of the frame (engine compartment side) to center of screws is 1-5/16".
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel

1charger69


B5 Charger

My 69's apart I can measure the holes for you if you still need them.

1charger69

Yes please....a second opinion never hurts....thank you