Modern Bullitt build

[keepat]

I thought you were the same guy.... just saw your latest post on the Viper forum, and thought the name was familiar, then I scroll down to the pics on this page and see the car in question.

Love the ACR E, and how this one is going.

Guilty, but I plead insanity ;-)
Thank you!
Pat

[keepat]

I was happy to find that my aluminum bumper brackets fit great and have no movement whatsoever. Not sure I would use the original bumper jack, but that was never going to happen anyway ;-)
Thanks
Pat

[Charger-Bodie]

loooks Goood!!!

[Derwud]

WOW...

[VegasCharger]

 

[keepat]

For the first time in over 3 years my Charger has moved! Only about 15' ;-) from one side of the shop to the other but it's definitely a big milestone. I will start to clean the paint booth to get it ready for painting. All the block sanding (600 grit) is finished. I just need to take the fenders, doors, hood, and trunk off and detail the jams.
Thanks
Pat

[Canadian1968]

why did you prime in such a light colour if you are painting it black ?

[keepat]

why did you prime in such a light colour if you are painting it black ?

I find the gray primer is easier to see the high and low spot when sanding, and the sealer I'm using is black.
Thanks
Pat

[cbrestorations]

I'm looking forward to building my black 68 r/t with a nice body as urs, superb work

[BDF]

Amazing work! 

[keepat]

I'm looking forward to building my black 68 r/t with a nice body as urs, superb work

And I'll look forward to watching that build as I do with your other cars!
Thanks

Amazing work! 

Thank you
Pat

[mike69440]

Those bumpers , Fabricated Al. Brackets  Carbon fiver lower support, Etc are incredible.

It's time you got thinking about lighting.
How about High power LEDs in the driving and main Headlamp lights?

https://www.google.com/search?q=Zdatt+14400LM+Led+Headlight&rlz=1C1PRFA_enUS437US442&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwiNiNKg4ZTXAhXJ4IMKHcGaAmYQsAQIMw&biw=1920&bih=965
So i bet this has you thinking?
https://www.cnet.com/roadshow/news/new-mopar-crate-engine-lets-you-hellcat-all-the-cars/

[keepat]

Those bumpers , Fabricated Al. Brackets  Carbon fiver lower support, Etc are incredible.

It's time you got thinking about lighting.
How about High power LEDs in the driving and main Headlamp lights?

https://www.google.com/search?q=Zdatt+14400LM+Led+Headlight&rlz=1C1PRFA_enUS437US442&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwiNiNKg4ZTXAhXJ4IMKHcGaAmYQsAQIMw&biw=1920&bih=965
So i bet this has you thinking?
https://www.cnet.com/roadshow/news/new-mopar-crate-engine-lets-you-hellcat-all-the-cars/

Mike,
Two years too late, but I would have considered it other than I think it would have been through the hood.
Thank you for the LED light link
Pat

[kokxville]

Man i like 69 chargers the most off the 2nd gen's,but everytime i look at this build of your 68 i want to make love to my wife immediately  
Just awesome 

[keepat]

Man i like 69 chargers the most off the 2nd gen's,but everytime i look at this build of your 68 i want to make love to my wife immediately  
Just awesome 

I guess we know what you did after your post ;-)
Thanks
Pat

[kokxville]

Man i like 69 chargers the most off the 2nd gen's,but everytime i look at this build of your 68 i want to make love to my wife immediately  
Just awesome 

I guess we know what you did after your post ;-)
Thanks
Pat

[Derwud]

The Ring Brother's have got nothing on you!!! Nice work...

[VegasCharger]

The Ring Brother's have got nothing no you!!! Nice work...

[timmycharger]

Looking great Pat!!

[keepat]

The Ring Brother's have got nothing no you!!! Nice work...

I appreciate the comments gentleman, but I have to disagree Ring Brothers do awesome work, have all the best tools, and many highly skilled workers. I'm just one knucklehead in a backyard garage, but I enjoy doing all my own work, and I'm happy with my backyard results.
Thanks again!
Pat

[Derwud]

The Ring Brother's have got nothing no you!!! Nice work...

I appreciate the comments gentleman, but I have to disagree Ring Brothers do awesome work, have all the best tools, and many highly skilled workers. I'm just one knucklehead in a backyard garage, but I enjoy doing all my own work, and I'm happy with my backyard results.
Thanks again!
Pat

That is what makes you build better.. You are one guy in a Garage making a beautiful car.. I impressed by what you do.. I am un impressed by what they did..

[Charger-Bodie]

I think the ring bros do beautiful work . I just like how this charger has a much more respected approach.

[keepat]

I think the ring bros do beautiful work . I just like how this charger has a much more respected approach.

Thank you!!
Pat

[keepat]

All the body panels are removed, still need to do some detail sanding in the door jams. I also drilled the holes for the power windows in the doors as well as the jams
Thanks
Pat

[VegasCharger]

All the body panels are removed, still need to do some detail sanding in the door jams. I also drilled the holes for the power windows in the doors as well as the jams
Thanks
Pat

Nice work Pat. 

Is this a custom made wire loom for the pw wires?

Power windows