Hotchkis presents...

[Bandit360]

I got mine in today.  I did not weld it.  Two of the holes in the supplied bracket fit up to the original sway bar mounting holes on the K frame.  I drilled the third.  Used 3/8-16 x 1 inch grade 8 bolts, nuts, washers and lock washers from Lowes.  It's never going to move.  With my poor welding skills, I'm sure it came out more secure.

Now with the bump up, I can see where the K frame to radiator support bracket goes.  I'll be ordering that from CI; it's not an expensive part.

I'm sure the car will handle much better (than with no bar).  I'll road test tomorrow.

Ray