News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Plastic to metal epoxy

Started by Ghoste, April 25, 2014, 05:04:59 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Ghoste

April 25, 2014, 05:04:59 AM
Is there a good brand of epoxy to bond plastic to metal that can be used easily at home by the bodywork challenged?

stripedelete

#1
April 25, 2014, 02:13:07 PM
Just had a conversation with someone last week on the same subject, bonding similar materials.
They were going to use one of West Systems brews.

cdr

#2
April 25, 2014, 03:19:55 PM
>
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr
Print
Go Up Pages1
User actions