Need a measurement

[1charger69]

Hi guys....I need the location of the screw holes for the vacuum cannister. ...my body guy made them go away..... .....thx much!

[NHCharger]

There is not much wiggle room for the canister since it's under the battery tray. Install the battery tray, then place your canister under it. Center the canister between the two battery tray supports. The measurement in from the inside edge of the frame (engine compartment side) to center of screws is 1-5/16".

[1charger69]

Thanks much!

[B5 Charger]

My 69's apart I can measure the holes for you if you still need them.

[1charger69]

Yes please....a second opinion never hurts....thank you