'69 Charger Headlight Harnesses...

[csx4590]

My '69 has been apart for about 9 years now and although I took photos and video of most of the dis-assembly, I have a question about the wiring/hose harnesses for the headlights. I bought a harness from Year One that has the wiring for the headlights and vacuum hoses. I don't have it in front of me right now. I am guessing that the hoses that are taped into this harness only go from the vacuum can to the actuators. Is that correct? And that there is another harness that goes from the can to the switch in the dash? We are finally getting the car back together and I have forgotten a ton of stuff because it has taken so long. Any help is greatly appreciated...

[tan top]

  have a read here   , the original vacuum hoses are color coded what goes where ,  with the year one harness  that are not ,

http://www.dodgecharger.com/forum/index.php/topic,84886.0.html

[csx4590]

I guess I should rephrase my question. Is it two sets of hoses, one from the switch to the vacuum can and another from the vacuum can to the actuators or is it all one set of hoses? I am no longer dealing with the shop that took my car apart so I was not present for the grill being taken out of the car...

Thanks...

[tan top]

  it is in two  ,  there are three hoses  that run from headlight switch , yellow stripe , green stripe , plain black , , that pass through the fire wall , the one with a green stripe goes to the vacuum canister ( large hose goes to vacuum tree on intake ) , the yellow stripe & plain black hoses continue on through the radiator core support , then end in a T connector !  then connect up to the hoses from the head lamp actuators !

1 vacuum tree on intake

2 head lamp switch

3 vacuum canister

4 headlamp actuators

[csx4590]

Very cool diagram. Thank you for the info and being patient with me...